GBP (£)
USD ($)
Code: TRIO-PS/ 1AC/12DC/ 5
din-rail-power-supply-unit-primary-switched-trio-ps-1ac-12dc-5
€117.89 ex VAT
Available to Order
QtyAdd to Cart
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/5 A
| Orderkey | 2866475 |
|---|---|
| Packing unit | 1 pc |
| Catalog page | Page 172 (C-6-2015) |
| GTIN | 4046356153751 |
| Weight per Piece (excluding packing) | 675.500 g |
| Custom tariff number | 85044030 |
| Country of origin | CN (China) |
| Width | 32 mm |
|---|---|
| Height | 130 mm |
| Depth | 115 mm |
| Degree of protection | IP20 |
|---|---|
| Ambient temperature (operation) | -25 °C ... 70 °C (> 55° C derating : 2.5%/K) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Max. permissible relative humidity (operation) | 95 % (at 25 °C, non-condensing) |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Degree of pollution | 2 |
| Nominal input voltage range | 100 V AC ... 240 V AC |
|---|---|
| Input voltage range | 85 V AC ... 264 V AC (derating < 90 V AC: 2.5 % per Kelvin) |
| Dielectric strength maximum | 300 V AC |
| AC frequency range | 45 Hz ... 65 Hz |
| Discharge current to PE | < 3.5 mA |
| Current consumption | 1.1 A (100 V AC) |
| 0.5 A (240 V AC) | |
| Nominal power consumption | 112.5 VA |
| Inrush current | < 15 A |
| Mains buffering time | > 26 ms (120 V AC) |
| > 100 ms (230 V AC) | |
| Recommended breaker for input protection | 6 A ... 16 A (Characteristics B, C, D, K) |
| Power factor (cos phi) | 0.64 |
| Type of protection | Transient surge protection |
| Protective circuit/component | Varistor |
| Nominal output voltage | 12 V DC ±1 % |
|---|---|
| Setting range of the output voltage (USet) | 10 V DC ... 18 V DC (> 12 V DC, constant capacity restricted) |
| Nominal output current (IN) | 5 A (-25 °C ... 55 °C) |
| Derating | 55 °C ... 70 °C (2.5%/K) |
| Connection in parallel | Yes, for redundancy and increased capacity |
| Connection in series | yes |
| Feedback voltage resistance | 25 V DC |
| Protection against overvoltage at the output (OVP) | < 25 V DC |
| Max. capacitive load | unlimited |
| Active current limitation | Approx. 5.9 A (in the event of a short-circuit) |
| Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
| < 2 % (change in load, dynamic 10 % ... 90 %) | |
| < 0.1 % (change in input voltage ±10 %) | |
| Residual ripple | < 20 mVPP |
| Output power | 60 W |
| Typical response time | < 1 s |
| Peak switching voltages nominal load | < 100 mVPP |
| Maximum power dissipation in no-load condition | 0.9 W |
| Power loss nominal load max. | 11 W |
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/5 A
| Orderkey | 2866475 |
|---|---|
| Packing unit | 1 pc |
| Catalog page | Page 172 (C-6-2015) |
| GTIN | 4046356153751 |
| Weight per Piece (excluding packing) | 675.500 g |
| Custom tariff number | 85044030 |
| Country of origin | CN (China) |
| Width | 32 mm |
|---|---|
| Height | 130 mm |
| Depth | 115 mm |
| Degree of protection | IP20 |
|---|---|
| Ambient temperature (operation) | -25 °C ... 70 °C (> 55° C derating : 2.5%/K) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Max. permissible relative humidity (operation) | 95 % (at 25 °C, non-condensing) |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Degree of pollution | 2 |
| Nominal input voltage range | 100 V AC ... 240 V AC |
|---|---|
| Input voltage range | 85 V AC ... 264 V AC (derating < 90 V AC: 2.5 % per Kelvin) |
| Dielectric strength maximum | 300 V AC |
| AC frequency range | 45 Hz ... 65 Hz |
| Discharge current to PE | < 3.5 mA |
| Current consumption | 1.1 A (100 V AC) |
| 0.5 A (240 V AC) | |
| Nominal power consumption | 112.5 VA |
| Inrush current | < 15 A |
| Mains buffering time | > 26 ms (120 V AC) |
| > 100 ms (230 V AC) | |
| Recommended breaker for input protection | 6 A ... 16 A (Characteristics B, C, D, K) |
| Power factor (cos phi) | 0.64 |
| Type of protection | Transient surge protection |
| Protective circuit/component | Varistor |
| Nominal output voltage | 12 V DC ±1 % |
|---|---|
| Setting range of the output voltage (USet) | 10 V DC ... 18 V DC (> 12 V DC, constant capacity restricted) |
| Nominal output current (IN) | 5 A (-25 °C ... 55 °C) |
| Derating | 55 °C ... 70 °C (2.5%/K) |
| Connection in parallel | Yes, for redundancy and increased capacity |
| Connection in series | yes |
| Feedback voltage resistance | 25 V DC |
| Protection against overvoltage at the output (OVP) | < 25 V DC |
| Max. capacitive load | unlimited |
| Active current limitation | Approx. 5.9 A (in the event of a short-circuit) |
| Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
| < 2 % (change in load, dynamic 10 % ... 90 %) | |
| < 0.1 % (change in input voltage ±10 %) | |
| Residual ripple | < 20 mVPP |
| Output power | 60 W |
| Typical response time | < 1 s |
| Peak switching voltages nominal load | < 100 mVPP |
| Maximum power dissipation in no-load condition | 0.9 W |
| Power loss nominal load max. | 11 W |
